Luke’s Mobile Detailing

Your Engine Bay Cleaned Right, In Raleigh

Luke's Mobile Detailing comes to your driveway in Raleigh and the Triangle and degrease, clean, and dress your engine bay so it looks like it just rolled off the lot.

Get a Free Quote Now

What's Included

The Process

1

Cool-Down Check

Luke confirms the engine is fully cool before starting. Working on a hot engine causes degreaser to flash and damages components, so this step is non-negotiable.

2

Sensitive Component Cover

Exposed electronics, the alternator, fuse box, and air intake are covered or taped off before any liquid is applied. This keeps the cleaning thorough without putting anything at risk.

3

Degreaser Application

A purpose-formulated engine degreaser is applied across the bay, targeting oil buildup around the valve cover, grime on the firewall, and grease on hoses and brackets.

4

Agitation

Multiple brush sizes are used to work the degreaser into every corner, around clamps, behind the battery tray, and into the textured plastic surfaces where dirt hides.

5

Low-Pressure Rinse

The bay is rinsed at controlled, low pressure to flush away degreaser and contaminants. High pressure is never used near wiring harnesses or electrical connectors.

6

Blow-Out and Dry

Compressed air is used to push water out of tight spots before hand-drying with clean microfiber towels. This step prevents water sitting against metal and causing rust spots.

7

Dressing and Finishing

A water-based dressing is applied to plastic covers, rubber hoses, and silicone components. It restores the dark, factory appearance without leaving a greasy residue that attracts dust.

Is This Right For You?

This service is a good fit for truck and SUV owners across Raleigh, Durham, and the Triangle who are selling their vehicle, prepping for an inspection, or just want the full picture clean. It pairs well with a full exterior or paint correction service if you want the whole vehicle done in one visit.

Common Questions About Engine Bay Detail

Yes, when it is done correctly. Luke covers sensitive electronics before any liquid is applied and uses low-pressure rinsing to avoid forcing water into connectors or the fuse box. Modern vehicles are built to handle water in the engine bay during rain, so a careful, controlled clean carries very little risk.
Most engine bay details take between 45 minutes and 1.5 hours depending on how built up the grime is and how large the bay is. A diesel truck that has never been cleaned will take longer than a sedan that gets serviced regularly.
You do need to be available at the start so Luke can confirm the engine is cool and go over anything specific to your vehicle. After that, you do not need to stand over him. Most customers drop the keys and head inside.
No. Cleaning the engine bay does not void your vehicle warranty. Manufacturers do not cover damage caused by neglect and heavy oil buildup, so keeping the bay clean is actually in your interest when it comes to maintaining coverage.
Once a year is a reasonable baseline for most drivers in the Raleigh area. If you drive a truck or SUV off-road, haul heavy loads, or notice oil leaks starting to accumulate, every six months makes more sense.

Areas We Serve

Ready for Engine Bay Detail?

Get a free, no-obligation quote. We come to you.

📞 Call 9197046642
Get a Free Quote Now

Get a Free Quote Now

Fill in a few details and we'll get back to you with a free, no-obligation quote.

Or call now: 9197046642